A complete, pre-packed hardware set for every shed: bagged, labelled and ready to assemble.
We put together the complete hardware set for each of your shed models: screws, bolts, rivets, brackets, trims, hinges, locks, louvres, gutters and downpipes.
Every item is sorted by size into its own labelled bag, and the bags for one shed are packed into one carton — so your customer opens the box and starts assembling. The contents follow your bill of materials; quantities, sizes and label text are yours to decide.
Hex-head roofing and cladding screws with sealing washers, plus stitching screws for laps and trims.
Flange bolts and hex bolts supplied as assemblies with nuts and washers for frames and base connections.
Blind rivets for trims, gutters and sheet-to-sheet joints.
Galvanised angle brackets, corner connectors and base plates, punched to your hole pattern.
Ridge caps, barge caps, corner trims and drip edges, made from the same pre-painted coil as the cladding so the colour matches.
Butt, T and strap hinges for shed doors, sized to the door weight.
Padbolts, hasps, lockable handles and padlocks for hinged and sliding shed doors.
Wall and gable vents that keep air moving and condensation down inside a closed shed.
Roll-formed gutters with brackets, stop ends and outlets.
Round and rectangular downpipes with bends and clips, colour-matched to the gutter.
Ranges shown are common specifications. Sizes, coatings and quantities are set by your bill of materials.
We configure one kit per shed model from your bill of materials.
Each size goes into its own bag, counted and labelled with size, quantity and where it is used.
Sizes, coatings, counts and packing are checked together before shipment.
Kits travel in the same container as your coil and accessories.
We reply within two working days with a sourcing plan and an indicative quotation.
